Delivery System
Transmission Low fault
Low transmission faults may be caused by:
Dirty or damaged slider attachment window or handpiece window.
Incorrect WL windows installed.
Delivery system fiber is bad.
No slider attachment installed.
Calibrate the laser system
after trying each of the following solutions:
Clean or replace the handpiece window.
Clean or replace the slider attachment(s) window.
Try another slider attachment.
Replace the fiber cable.
Verify focus lens and beam splitter optics.
* If problem persists, contact Candela Service.
⚠️ If this information is not enough or you are still facing the same problem, do not hesitate to leave your inquiry in a comment .